The Peeps eyeglass cleaner is a simple tool for keeping your glasses clean. It uses soft pads and a small brush to wipe away dust and smudges. Many people like it because it is easy to use and does not scratch lenses. But, like your glasses, it needs cleaning too.
So, how to clean a Peeps eyeglass cleaner?
To clean a Peeps eyeglass cleaner, just slide the pads back into the case after each use. This recharges them for next time. Do not use water or liquids. Use the brush to remove dust before cleaning, and tap it gently if it gets dirty. Replace the pads after 500 uses.
Want to learn more? Keep reading for the full step-by-step guide!
How to Clean a Peeps Eyeglass Cleaner?
The Peeps Eyeglass Cleaner is easy to care for and keeps your glasses spotless. You don’t need any soap or water. Its self-cleaning design means less work for you. Follow these steps to help your Peeps last a long time.
Step 1: Recharge the Pads in the Case
After you use your Peeps cleaner, put the pads back into the case. Sliding the tongs in and out helps the pads refresh, so they’re ready for next time. The carbon inside the case helps create a clean surface for each use. Make sure to do this every time after you clean your glasses.
Step 2: Never Use Water or Liquids
Do not put water, alcohol, or any liquid on the Peeps cleaner. Using liquids can harm the special carbon pads and make them work less well. These pads only work when dry, so always keep them away from moisture. It’s a dry-cleaning tool, which means no need for sprays or cloths.
Step 3: Clean Lenses With the Brush First
Before you use the cleaning pads, brush off dust or dirt from your glasses. The Peeps cleaner has a soft brush just for this. If the brush gets dirty, tap or blow on it gently to remove loose stuff. For more tips on using this tool, you can check a Peeps by Carbon Klean review to see what other users say about the brush and pads.
Step 4: Replace the Pads When Needed
Each set of carbon pads lasts for up to 500 cleanings. When you notice the pads don’t clean well, it’s time to replace them. New Peeps Carbon Klean Replacement Pads are easy to install and work for about 1,000 more uses. Always follow the instructions that come with your new pads.
Step 5: Store Your Peeps Cleaner Properly
Keep your Peeps in its case when you are not using it. This keeps the pads and brush safe from dust and damage. Proper storage also helps recharge the pads every time you put them back. With the case closed, your cleaner stays ready for next use.
Common Mistakes to Avoid While Cleaning the Peeps Eyeglass Cleaner
The Peeps Eyeglass Cleaner keeps your glasses clear, but only if you care for it the right way. Many people make small mistakes that lower its cleaning power. Knowing these mistakes can help your Peeps last longer and work better. Let’s look at the things you should avoid to get the most from your cleaner.
- Using Liquids: Water, alcohol, or other liquid cleaners break down the special carbon pads and stop them from cleaning your glasses well.
- Washing the Pads: Washing or scrubbing the microfiber pads damages their surface and reduces cleaning power; always let the case do the work.
- Touching the Pads: Your fingers carry oils and dirt that can stick to the carbon pads or brush, lowering their ability to clean properly.
- Skipping the Brush: Cleaning dirty lenses without first brushing off dust can scratch the surface and embed particles into the pads over time.
- Improper Storage: Leaving the cleaner outside its case lets dust collect on the pads and brush, which makes cleaning your glasses less effective.
- Overusing Old Pads: Using pads past 500 cleanings will make them less effective and could even scratch your lenses, so change them regularly.
- Pressing Too Hard: Too much pressure on the pads can damage both the cleaning surface and your lens coatings; gentle strokes are the safest.
- Wrong Surfaces: Only use Peeps on eyeglasses, sunglasses, or optical lenses; cleaning other things can contaminate or wear out the pads fast.
How Often Should You Clean Your Peeps?
You don’t need to clean your Peeps Eyeglass Cleaner like you do with cloths or sprays. This unique tool is made to be self-cleaning, making it easy to care for. After every use, just slide the cleaning tongs back into the case to recharge the pads. With these steps and a few checks, you can keep your Peeps working well every day.
Regular Use and Recharging
Each time you clean your glasses, put the Peeps cleaner back in its case to refresh the pads for next time. The carbon pads recharge through friction with the case, giving you a fresh cleaning surface each use. Skipping this step can make your Peeps less effective at cleaning your lenses. You help your cleaner last longer by making this a daily habit.
Checking for Debris
Before cleaning, look at the pads and the brush to check for any dust or particles stuck to them. If you see debris, gently tap or blow on the brush to clear away loose bits right away. Cleaning with dirty pads could scratch your lenses and shorten the lifespan of a typical Peeps cleaner, so this step matters. It only takes a second and can save your glasses from unwanted marks.
Using the Brush as Needed
When dust or dirt collects on your lenses, use the brush to sweep these away before using the pads. The brush is soft and designed to pick up loose particles without scratching your glasses at all. Always use gentle strokes and never press hard on the brush or pads during cleaning. Keeping debris away helps your cleaner last much longer and work better.
Pad Replacement Timing
Each set of carbon pads lasts about 500 uses, depending on how often you clean your glasses every week. When you notice smudges don’t disappear or cleaning seems less effective, it’s time to swap in new pads. Regular users may need replacement pads every few months, while occasional users will go much longer between changes. Always follow the package instructions for replacing the pads with care.
Avoiding Extra Cleaning
You never need to wash or clean the Peeps pads with water or soap since they recharge in the case automatically. Using liquids or cleaning sprays could damage the special pads and lower how well they work each time. Just store your Peeps cleaner in its case when you finish, and it will be ready for next use. Simple care helps keep your tool and glasses in great shape.
Can You Remove Stubborn Smudges With Peeps Without Damaging Lenses?
Yes, the Peeps Eyeglass Cleaner can effectively remove stubborn smudges from lenses without damaging them, provided you follow the proper technique and precautions. Here’s how to do it safely:
Use the Brush First
Start by using the retractable goat-bristle brush to gently sweep away any dust, dirt, or larger particles from the lenses. This prevents scratching by ensuring no abrasive debris is present when you use the pads.
Apply Gentle Pressure With Pads
Use the carbon microfiber pads to clean the lenses in a gentle, circular motion. The carbon technology is designed to absorb oils and smudges, including stubborn ones, without the need for liquids. Apply light pressure to avoid stressing the lens or its coatings.
Focus on Problem Areas
For stubborn smudges (e.g., fingerprints or oily residues), gently rub the affected area with the pads for a few extra seconds. The carbon compound in the pads is formulated to lift and trap oils effectively.
Avoid Excessive Force
Do not press too hard, as excessive force could potentially damage delicate lens coatings or the pads themselves. Let the carbon technology do the work.
Recharge Pads After Use
After cleaning, re-sheath the tongs into the case to refresh the pads. This ensures they remain effective for subsequent uses by redistributing the carbon molecules.
Tips to Store Your Peeps After Cleaning
Sometimes, you clean your glasses and just toss the cleaner aside, but there’s a better way to take care of it. If you store your Peeps Eyeglass Cleaner right, it will last much longer and always work well. It doesn’t take much effort to keep it in good shape, just a few simple steps after every use. Let’s talk about some easy tips to store your Peeps after you’re done cleaning your glasses.
Back in the Case
After you finish using the Peeps cleaner, always slide the tongs back into the case. This move keeps the cleaning pads fresh and ready for next time. The case is made to help recharge the pads through a little friction. It’s quick and helps your cleaner work better every time you use it.
Case Closed Tight
Make sure the case is closed all the way before you put it away. Keeping it closed stops dust or dirt from getting on the pads or brush. If the case is open, the cleaner can get dirty fast and not work as well. Always double-check the case before tossing it in your drawer or bag.
Cool and Dry Place
Store your Peeps cleaner somewhere that stays cool and dry, not in a hot or damp spot. Heat and humidity can mess with the carbon pads and the whole cleaner. Leaving it in a steamy bathroom or a car on a sunny day is not a good idea. A bedroom drawer or a shelf works just fine.
No Loose Storage
Try not to drop your cleaner loose in a bag, backpack, or pocket without the case. Dirt, crumbs, and even oils from your hands can make the pads dirty or ruin the brush. The case is there for a reason, so always use it for safe keeping. This step keeps everything clean for the next time you need it.
Stay Away From Liquids
Keep your Peeps cleaner away from water, juice, or even cleaning sprays. Liquids can mess up the dry-cleaning pads and make them stop working right. Never use wet wipes or anything damp on the cleaner. If you want to make homemade eyeglass cleaner for your glasses, don’t use it on your Peeps device.
Check Before Storing
Before you put the cleaner away, look at the brush and pads. If you see dust or dirt stuck to them, just tap or blow gently to clear it off. You don’t want to lock in dirt when you close the case. This small check keeps your Peeps working great and your glasses scratch-free.
Extra Protection
If you travel a lot or won’t use the cleaner for a while, think about a small pouch. A pouch gives extra safety from scratches and keeps dust out. Just make sure the case is closed before putting it in the pouch. You can use any soft, clean pouch you already have at home.
FAQs About Cleaning Peeps Eyeglass Cleaner
Cleaning your Peeps eyeglass cleaner might seem confusing at first, but it’s actually simple once you know the right steps. Here are some common questions and answers to help you care for your Peeps tool. These tips will keep it working well for longer.
Can I Sanitize My Peeps Cleaner With Wipes?
No, you shouldn’t use sanitizing wipes on your Peeps cleaner. The chemicals and moisture in wipes can damage the carbon pads. Stick to the self-cleaning method by returning the tongs to the case after every use to keep it safe.
How Do I Know If My Peeps Cleaner Is Worn Out?
You’ll notice the pads start leaving smudges or streaks on your lenses, or just don’t clean well. When this happens, it means the carbon pads are worn out and it’s time to replace them with new ones for the best results.
Can I Clean the Case of My Peeps Cleaner?
Wipe the outside of the case with a dry or very slightly damp cloth if needed, but never get the inside wet. Keeping the outside dust-free helps protect the pads and brush, but don’t use cleaners or submerge it in water.
Is It Okay to Share My Peeps Cleaner With Others?
While you can, it’s better for each person to have their own Peeps cleaner. Sharing may transfer skin oils or dirt between users, which could affect cleaning performance. This also keeps germs and bacteria from spreading between different sets of glasses.
What Should I Do If the Brush Gets Bent?
If the retractable brush gets bent, gently smooth the bristles back into place with clean hands. Avoid using force or pulling on the bristles, as this can damage the brush. Storing it properly helps prevent future bending or breakage.
Can I Use Compressed Air on the Pads?
Using compressed air is not recommended. The strong air pressure can damage the delicate carbon pads and scatter dust deeper inside the case. Gently tapping or blowing on the brush to remove debris is enough for regular maintenance without harming your Peeps cleaner.
How Do I Clean the Tongs If They Get Sticky?
If the tongs get sticky, wipe them with a dry microfiber cloth. Avoid using any cleaning solutions or water, as this could ruin the pads. Make sure your hands are clean before using your Peeps to avoid transferring residue to the tool.
What Happens If I Drop My Peeps Cleaner?
If you drop your Peeps, inspect the device for cracks or broken parts. Make sure the pads and brush are still clean and working properly. Always store the cleaner in its case to protect it from damage and keep it working well.
Can I Use Peeps Cleaner on Camera Lenses or Screens?
No, Peeps cleaners are made just for eyeglasses, sunglasses, and optical lenses. Using them on cameras, phones, or computer screens may transfer particles or scratch delicate surfaces, reducing cleaning effectiveness and possibly damaging those expensive electronics or screens.
Is There a Way to Refresh Old Pads Temporarily?
There isn’t a safe or effective way to refresh the carbon pads at home. Once they lose their cleaning power, replacement is the only option. Using worn-out pads can leave your glasses dirty or scratched, so switch to new ones when needed.
Last Briefs
Taking care of your Peeps eyeglass cleaner is simple. Put it back in the case after every use. Do not use water or wet wipes. Always use the brush before the pads. If you want to know how to clean a Peeps eyeglass cleaner, just follow these easy steps.
Change the pads when they stop working well. Avoid common mistakes so your glasses stay clean and clear. When you use these tips, your cleaner will last longer. It will always be ready to help you see better every day.
